Whirlpool oven error codes usually appear as an F number plus an E number, such as F3 E0 (shown as "F3 E0" or "E0 F3"). The F number tells you the system: F3 is the oven temperature sensor, F5 the door latch, F1/F2 the control or touchpad, F6 control communication, F8 the cooling fan and F9 the home wiring. Many codes clear with a one-minute power reset. Type your code below to jump to the fix.
How to Read a Whirlpool Error Code
Whirlpool's electronic ovens show a fault code made of two parts. Whirlpool notes the order can vary: you may see F3 E0 or E0 F3, and they mean the same thing.
- F number: the system with the problem, such as the sensor (F3) or door latch (F5).
- E number: the specific part or circuit within that system, such as the upper oven (E0) or lower oven (E1) on many double ovens.
- Older models may show a single code such as F1, F2 or F01–F06.
The meanings below come from Whirlpool's own Product Help pages for wall ovens and cooking appliances. Ranges use the same code families on many models, but always check your owner's manual for your exact model.
Code Families at a Glance
| Code family | Usually points to | Action |
|---|---|---|
| F9 or F9 E0 | Wiring or Power Supply | DIY checks + pro |
| F3 Codes | Oven Temperature Sensor | DIY checks + pro |
| F3 E4 | Meat Probe or Power Attachment | Try a reset first |
| F1 and F2 Codes | Control Board or Touchpad | DIY checks + pro |
| F5 Codes | Door Latch or Door Switch | DIY checks + pro |
| F6 Codes | Control Communication or Overheating | DIY checks + pro |
| F8 Codes | Cooling Fan or Airflow | DIY checks + pro |
| F7 Codes | Steam Oven Water System | DIY checks + pro |
| F4 and Microwave Codes (Combination Ovens) | Call service | |
| Display Messages That Aren't Faults | Not a fault |
How to Reset a Whirlpool Oven
Whirlpool recommends a power reset for most fault codes:
- Turn off the breakerSwitch off the oven's circuit breaker(s) or remove the fuse(s) for one minute. For plug-in gas ranges, unplug the range.
- Turn the power back onRestore the breaker and wait about 10 seconds before pressing any keys; pressing keys too soon can itself trigger an F9 code.
- Watch for one minuteMonitor the oven for a minute to make sure the code doesn't come back.
- Test the ovenRun a simple Bake cycle and check it heats normally.
- If the code returnsThe part it points to usually needs repair. Schedule service with your model number ready.
After a power outage, some codes or a flashing clock are normal. See how to reset an oven after a power outage.
Whirlpool Oven Error Codes Explained
F9 or F9 E0: Wiring or Power Supply
DIY checks + proWhat it means: Whirlpool says this code most often means the appliance is wired incorrectly at the home electrical supply or at the hard-wire connection.
| Code | Whirlpool says |
|---|---|
| F9 / F9 E0 | Miswired outlet or connection, or the control detected incorrect voltage |
Common causes
- Incorrect wiring at installation (common if the oven was installed in the last few months)
- Power-line "noise" during an outage that the control read as wrong voltage
- Pressing keys within about 10 seconds of power-up
What to try
- Reset power at the breaker for one minute, then wait 10 seconds before pressing any keys.
- If the oven was installed recently, have a qualified electrician verify the electrical supply.
- If it returns after an outage, reset again; call service if it persists.
F3 Codes: Oven Temperature Sensor
DIY checks + proWhat it means: On most Whirlpool ovens, F3 codes point to an oven temperature sensor, the control or the wiring between them. On older models, F1, F2, F01 and F02 can also indicate a sensor problem.
| Code | Whirlpool says |
|---|---|
| F3 E0 | Upper oven temperature sensor, control or wiring |
| F3 E1, E5–E9 | Lower oven temperature sensor, control or wiring |
| F3 E2, F3 E3 | Oven temperature sensor, control or wiring |
| F3 (no E number) | Oven control or wiring |
| F1, F2, F01, F02 (older models) | Oven temperature sensor, control or wiring |
Common causes
- A failed temperature sensor (probe at the back of the oven)
- A loose or damaged sensor connector
- A control board fault
What to try
- Reset power at the breaker for one minute and watch for one minute.
- With power off, check that the sensor connector is fully seated.
- If you're comfortable with a multimeter, test the sensor against the values in your model's service sheet.
- Replace the sensor with the exact part for your model, or call service.
F3 E4: Meat Probe or Power Attachment
Try a reset firstWhat it means: Whirlpool says F3 E4 can be caused by a dislodged meat probe or power attachment, depending on the model.
| Code | Whirlpool says |
|---|---|
| F3 E4 | Meat probe or power attachment not seated |
Common causes
- Meat probe not fully inserted in its socket
- Probe removed during a probe cycle
What to try
- If you're using the probe, make sure it's pushed fully into the receptacle.
- Remove and reinsert it, then restart the cycle.
- Reset power if the code stays.
F1 and F2 Codes: Control Board or Touchpad
DIY checks + proWhat it means: F1 codes generally relate to the main control or appliance control board, and F2 codes to the touchpad, keypad or user interface.
| Code | Whirlpool says |
|---|---|
| F1 E0 | User interface (touchpad), control or wiring |
| F1 E1 | Oven appliance manager control or wiring |
| F1 E7, F1 E9 | Appliance control board or wiring |
| F2 E0–E6 | User interface or keypad, control or wiring |
| F0 E0 | Oven control system or electronic control |
| F03, F04, F06 (older) | Electronic oven control or wiring |
Common causes
- A stuck or damaged touchpad key, or moisture under the panel
- A failed control board
- A loose ribbon cable or wiring
What to try
- Reset power at the breaker for one minute.
- Wipe the control panel with a barely damp cloth; never spray cleaner directly on it.
- If a key seems stuck or the code returns, the keypad or control usually needs service.
F5 Codes: Door Latch or Door Switch
DIY checks + proWhat it means: F5 codes point to the oven door latch assembly, door switch or wiring. On double ovens, F5 E3 and F5 E4 refer to the lower oven.
| Code | Whirlpool says |
|---|---|
| F5 E0, E1, E2, E5, E7 | Door latch assembly, door switch or wiring |
| F5 E3, F5 E4 | Lower oven door latch or door switch |
| F5, F05 (older) | Door latch assembly or switches |
Common causes
- Latch stuck after self-clean
- Something blocking the latch
- A failed latch motor or switch
What to try
- Make sure the door closes fully and nothing blocks the latch.
- Let the oven cool completely if it was self-cleaning.
- Reset power at the breaker for one minute.
- If the code returns, the latch assembly usually needs service.
F6 Codes: Control Communication or Overheating
DIY checks + proWhat it means: F6 codes generally relate to the appliance manager controls, converter control or control panel. F6 EA means the user interface control sensed an over-temperature condition. Whirlpool notes F6 E0 may appear when starting a cycle.
| Code | Whirlpool says |
|---|---|
| F6 E0 | May appear when starting a cycle; reset power |
| F6 E1–E4 | Appliance manager or converter control, or wiring |
| F6 E5 | Control panel assembly or wiring |
| F6 E6 / F6 E9 | Upper / lower oven appliance manager control |
| F6 EA | User interface control sensing over-temperature |
| F6 (no E number) | Oven control or wiring |
Common causes
- Communication loss between control boards
- Overheating near the controls (blocked vents)
- A failed control board
What to try
- Reset power at the breaker for one minute.
- For F6 EA, let the oven cool and make sure vents around the controls aren't blocked.
- If the code returns, schedule service.
F8 Codes: Cooling Fan or Airflow
DIY checks + proWhat it means: F8 codes point to the oven cooling fans, an airflow restriction, or the exhaust air temperature sensor.
| Code | Whirlpool says |
|---|---|
| F8 E0 | Airflow restriction, upper oven cooling fan or wiring |
| F8 E1 | Airflow restriction, lower oven cooling fan or wiring |
| F8 E2, F8 E3 | Oven cooling fan or wiring |
| F8 E4, F8 E5 | Exhaust fan air temperature sensor or wiring |
Common causes
- Blocked vents
- A failed cooling fan motor
- A faulty air temperature sensor
What to try
- Check that nothing blocks the vents around the oven, trim and cabinet.
- Reset power at the breaker for one minute.
- If the code returns, the fan or sensor needs service.
F7 Codes: Steam Oven Water System
DIY checks + proWhat it means: On steam-equipped models, F7 codes relate to the water system.
| Code | Whirlpool says |
|---|---|
| F7 E0 | Water level or water level sensor |
| F7 E1 | Water boiler temperature sensor |
| F7 E2 | Reset power; call service if it returns |
| F7 E3 | Water filter |
| F7 E4 | Water conductivity sensor |
Common causes
- Empty or incorrectly seated water reservoir
- A clogged or expired water filter
- Scale buildup or a failed sensor
What to try
- Check and refill the water reservoir, and make sure it's seated correctly.
- Replace the water filter if it's due.
- Descale per your manual, then reset power.
- Call service if it persists.
F4 and Microwave Codes (Combination Ovens)
Call serviceWhat it means: On combination wall ovens, F4 codes (and some F1 and F6 codes) refer to the built-in microwave's inverter, sensors, probe or controls. A plain F4 on some models points to the oven cavity control.
| Code | Whirlpool says |
|---|---|
| F4 E0, E8, E9 | Microwave inverter or wiring |
| F1 E5 | Microwave inverter, magnetron or wiring |
| F4 E1, E2, E4, F1 E6 | Microwave thermistor, humidity or other sensor |
| F4 E3, F4 E6 | Microwave exhaust or waveguide temperature sensor |
| F4 E5 | Microwave weight sensor |
| F4 E7 | Microwave meat probe or receptacle |
| F1 E2, E3, E4, F6 E7, E8 | Microwave interface, appliance manager or power relay |
| F4 (no E number) | Oven cavity control or wiring |
Common causes
- Microwave electronics or sensor failure
- Wiring faults
What to try
- Reset power at the breaker for one minute.
- Don't attempt microwave repairs yourself; high-voltage parts can be dangerous even unplugged.
- Schedule service if the code returns.
Display Messages That Aren't Faults
Not a faultWhat it means: Several displays are normal messages, not failures.
| Code | Whirlpool says |
|---|---|
| C | Temperature shown in Celsius (oven won't show above 260) |
| CAL | Oven calibration feature |
| LOC, Lock, Locked | Control lock is on |
| SAB, 5Ab, 5A6, 5A7 | Sabbath mode is on |
| PF, flashing time | Power failure; press Cancel and reset the clock |
| Clock is blank | Clock display is hidden (hold Clock Set/Start about 5 seconds on many models) |
| Probe / Insert Probe | Meat probe message |
| PUSH or PSH | Control prompt; see your manual |
Common causes
- A feature was turned on, or power was interrupted
What to try
- Press Cancel, or follow your owner's manual to turn the feature off.
Codes Starting With 1c, 1d, 3d, 4d or 9d
Newer Whirlpool wall ovens can show four-character codes such as 1c1c, 1d11, 3d21, 4d11 or 9d62. Whirlpool lists these as separate fault codes. Start with a one-minute power reset; if the code returns, note the exact code and your model number and contact Whirlpool service, since these codes are model-specific.
For problems without a code, such as an oven that won't heat or cooks unevenly, use our oven troubleshooting guide. Own a GE? See GE oven error codes.
DIY or Call a Technician?
Usually safe to DIY
- Power resets at the breaker
- Reseating the meat probe (F3 E4)
- Clearing blocked vents (F8, F6 EA)
- Refilling water and replacing filters on steam ovens (F7)
- Replacing an oven sensor (F3) if you're handy, with power off
Call a technician
- Control board and communication faults (F1, F6)
- Door latch failures that won't reset (F5)
- Microwave faults on combination ovens (F4)
- Wiring problems (F9 after installation)
- Anything involving gas
Always switch off power at the breaker before removing panels or parts.
Repair or Replace?
Sensors, probes and filters are usually inexpensive fixes. Control boards, latch assemblies and microwave inverters cost more, especially on older or discontinued models. If a repair would cost more than about half the price of a comparable new oven and your oven is more than about 10 years old, replacing it is often the better choice. See how long ovens last and compare brands in our best oven brands guide.
How to Prevent Error Codes
- Don't spray cleaner on the control panel. Spray a cloth instead to keep moisture out of the touchpad.
- Use self-clean sparingly. Very high heat stresses the latch, sensor and controls.
- Keep vents clear around the oven and control panel so cooling fans can work.
- Wait before pressing keys after power returns from an outage.
- Maintain steam ovens: descale and replace filters as the manual recommends.
Prefer cleaning by hand? See the best oven cleaners.
Whirlpool Oven Error Code FAQs
What does F3 E0 mean on a Whirlpool oven?
Whirlpool says F3 E0 points to the upper oven temperature sensor, the control or the wiring. Reset power for one minute; if it returns, the sensor often needs replacing.
What does F3 E1 mean?
F3 E1 points to the lower oven temperature sensor, the control or the wiring.
What does F9 E0 mean on a Whirlpool oven?
Whirlpool says F9 or F9 E0 most often means the appliance is wired incorrectly at the home supply or connection. It can also appear after an outage or if keys are pressed within about 10 seconds of power-up.
What does F5 E1 mean?
F5 codes, including F5 E1, point to the door latch assembly, door switch or wiring. Make sure nothing blocks the latch, let the oven cool and reset power.
What does F2 E0 mean on a Whirlpool oven?
F2 E0 points to the user interface or keypad, the control or the wiring.
What does F6 E1 mean?
F6 E1 points to the appliance manager control, converter control or wiring. Reset power; call service if it returns.
How do I clear an error code on my Whirlpool oven?
Turn off the breaker for one minute, turn it back on, and watch the oven for a minute. If the code returns, the indicated part needs repair.
Why does my Whirlpool oven show "C"?
It's displaying temperatures in Celsius. Your owner's manual explains how to switch back to Fahrenheit.
What does PF mean on a Whirlpool oven?
PF means there was a power failure. Press Cancel to clear it and reset the clock if needed.
Do KitchenAid and Maytag ovens use the same codes?
Many KitchenAid and Maytag ovens are made by Whirlpool Corporation and use similar F/E code families, but meanings can differ by model. Check your manual or the brand's support site.
The Bottom Line
Read Whirlpool codes by the F number: F3 is the temperature sensor, F5 the door latch, F1 and F2 the controls and touchpad, F6 control communication, F7 the steam system, F8 cooling fans and F9 the home wiring. Start with a one-minute power reset, check the simple fixes, and call service if the code returns.
TopOvenPicks is reader-supported. When you buy through links on our site, we may earn an affiliate commission at no extra cost to you.
