LG oven error codes start with F followed by a number (F1, F9, F17 and so on), and each points to a part of the range: a temperature sensor, heating, a fan, the door lock or the control. For most codes, LG's first fix is the same: press Clear/Off, and if the code comes back, turn off the breaker for 30 seconds. Find your code below.
Quick Answer: How to Clear an LG Oven Error Code
- Press Clear/Off (or Power on/off on cooktops) and try the function again.
- If the code returns, switch off the range's circuit breaker, wait 30 seconds and switch it back on.
- If it still returns, LG says the range needs service. Note the code and model number and contact LG.
- Codes such as PF and Sb aren't faults: PF means the power was interrupted, and Sb is Sabbath mode.
LG Oven Error Code Map
LG's range error codes grouped by the system they point to, based on LG's US help library. Exact meanings can vary by model; your owner's manual has the final word.
Temperature sensors
F1, F2 upper oven thermistor · F4, F5 lower oven thermistor · F16 oven sensor issue
Heating
F6 upper oven heating error · F9 upper oven not heating properly · F19 oven heating error
Fans
F7 upper convection fan · F17 convection fan · F27 cooling fan during self clean · F45, F46 fan error
Door lock
F10 upper oven door lock failure · F20 lower oven door lock failure
Controls and power
F3 touch pad key error · F11 communication error · F38 main board–inverter communication · F42 voltage error · F36 transistor error
Probe and accessories
F8, F18 meat probe error · F21, F22, F24, F25 steam sensor · F51, F52, F56, F59 griddle · F62, F69 sous vide
How to Reset an LG Oven
- Press Clear/Off and wait a moment, then try the function again.
- Turn off the breaker for the range (often a double breaker labeled Range or Oven).
- Wait 30 seconds, as LG recommends, then switch it back on.
- Set the clock if it's flashing, and test a simple Bake cycle.
- If the code returns, stop using that function and arrange service.
Lost power recently? See how to reset an oven after a power outage.
Common LG Oven Error Codes Explained
Oven Temperature Sensor (Thermistor) Error
LG says: F1 and F2 indicate an upper oven thermistor error; F4 and F5 a lower oven thermistor error (on double ovens). The thermistor is the temperature sensor inside the oven cavity.
Common causes: a failed or damaged sensor, a loose connector behind the oven wall, or a wiring fault.
What to try: press Clear/Off and retry; if it returns, reset the breaker for 30 seconds. If it persists, the sensor or wiring needs testing by a technician.
Touch Pad (Key) Error
LG says: on LG's US list, F3 is a touch pad sensor key error. LG notes the cause is often a short in the wiring harness leading to a button, not necessarily the button itself. On some electric range models, LG's help library also lists F-3 as an open oven sensor, so check your manual.
Common causes: moisture or cleaner on the control panel, a stuck key, or a wiring short.
What to try: make sure the panel is clean and dry, then reset the breaker. If it returns, the control or wiring needs service.
Oven Not Heating Properly
LG says: F6 is an upper oven heating error, F9 means the upper oven is not heating properly and F19 is an oven heating error. On LG electric ranges, LG explains that F-9 appears when the oven fails to reach 150°F within five minutes of preheating.
Common causes: a failed bake or broil element (electric), a weak igniter or gas supply issue (gas), a tripped half of a double breaker, or a sensor fault.
What to try: check that both halves of the breaker are on, reset it for 30 seconds and try Bake again. On gas models, make sure the gas valve is open. If the code returns, call for service. Our guide to an oven not heating up covers the usual causes.
Door Lock System Failure
LG says: F10 is a door locking system failure on the upper oven; F20 on the lower oven.
Common causes: the lock motor or switch failing, often after a self-clean cycle, or something obstructing the latch.
What to try: let the oven cool completely, then reset the breaker. Don't force the door. If it stays locked or the code returns, call for service.
Fan Errors
LG says: F7 is an upper convection fan error, F17 a convection fan error, F27 means the cooling fan stalled or locked during self clean, and F45/F46 are fan errors.
Common causes: a failed fan motor, something blocking the fan, or a wiring fault.
What to try: make sure nothing is touching the fan cover at the back of the oven, then reset the breaker. If the code returns, the fan needs service. See our guide to oven troubleshooting for more fan symptoms.
Meat Probe Error
LG says: F8 and F18 indicate an oven meat probe error.
What to try: unplug the probe, check the jack for food or damage, plug it in fully and try again. If the code shows without the probe, reset the breaker and call for service if it persists.
Communication, Board and Voltage Errors
LG says: F11 is a communication error, F38 a communication error between the main board and inverter, F36 a transistor error and F42 a voltage error.
Common causes: a power surge, a loose connector between boards, or a failing control board.
What to try: reset the breaker for 30 seconds. If it returns, or follows a storm or outage, have the range serviced; a voltage error may also mean the home's supply should be checked by an electrician.
Cooktop, Steam, Griddle and Sous Vide Codes
| Code | LG meaning | LG's first step |
|---|---|---|
| F21, F22, F24, F25 | Steam sensor failure | Reset the breaker |
| F33, F34 | Front induction burner temperature sensor error | Reset the breaker |
| F51 | Griddle sensor error | Reset the breaker |
| F52 | Griddle sensor short detected | Reset the breaker |
| F56 | Griddle heating error | Reset the breaker |
| F59 | Griddle not heating properly | Reset the breaker |
| F62 | Sous vide temperature sensor error | Reset the breaker |
| F69 | Sous vide not heating properly | Reset the breaker |
On some LG cooktops, single-digit codes also appear: LG lists codes 1–3 as thermistor errors, 4 as metal objects or water on the cooktop for too long (clean the surface and touch pads), 5 as a display error and 6 as low voltage, which needs a qualified electrician.
Display Messages That Aren't Errors
| Display | Meaning | What to do |
|---|---|---|
| PF | Power was interrupted | Press Clear/Off and set the clock; reset the breaker if it returns |
| Sb (may look like "5b") | Sabbath mode is on | Follow your manual to exit; on many models, hold Clock for 3 seconds |
| Hot surface indicator | Cooktop is still hot | Normal; if it stays on when cool, reset the breaker |
| Loc / lock icon | Control lock is on | Hold the lock key for about 3 seconds (check your manual) |
Not sure what an icon means? Our oven symbols guide explains the common ones.
DIY or Call LG Service?
Safe to try yourself
- Clear/Off and retry
- 30-second breaker reset
- Cleaning and drying the control panel
- Reseating the meat probe
- Checking both breaker halves and the gas valve
Call a technician for
- Any code that returns after a reset
- Replacing sensors, elements, fans, lock motors or boards
- Burning smells, sparks or a gas smell
- Voltage errors or repeated breaker trips
- Doors locked after the oven is cool
Before you call, note the code, the model and serial number (on a label inside the door frame or storage drawer), and when the code appears. If your range is older and repairs are adding up, read how long ovens last before deciding to repair or replace.
How to Prevent LG Oven Error Codes
- Keep the control panel dry and avoid spraying cleaner directly on it.
- Don't block the oven vents or the fan cover with foil or pans.
- Use self-clean sparingly; it's hard on locks, fans and sensors. Wipe spills early instead.
- Protect against surges by switching off the breaker during storms and long outages.
- Handle the probe gently and keep its jack clean.
LG Oven Error Code FAQs
How do I clear an error code on my LG oven?
Press Clear/Off and try again. If the code returns, turn off the circuit breaker for 30 seconds and turn it back on. If it still returns, LG says the range needs service.
What does F9 mean on an LG oven?
F9 means the upper oven isn't heating properly. On LG electric ranges, LG says it appears when the oven doesn't reach 150°F within five minutes of preheating.
What does F1 mean on an LG range?
F1 is an upper oven thermistor (temperature sensor) error. Reset the breaker; if it returns, the sensor or its wiring needs service.
What does F3 mean on an LG oven?
On LG's US list, F3 is a touch pad key error, often caused by a short in the wiring harness. Some electric models use F-3 for an open oven sensor, so check your manual.
What does F10 mean on an LG oven?
F10 is a door locking system failure on the upper oven. Let the oven cool, reset the breaker and call for service if it persists.
What does F17 mean on an LG range?
F17 is a convection fan error. Check that nothing blocks the fan, reset the breaker and call for service if it returns.
What does PF mean on an LG oven?
PF means the power was interrupted. Press Clear/Off and set the clock.
Why does my LG oven show an error after self-clean?
Self-clean runs extremely hot and can trigger door lock (F10/F20) or cooling fan (F27) errors. Let the oven cool, reset the breaker and call for service if the code returns.
Can I still use my LG oven with an error code?
If the code clears after a reset and doesn't return, yes. If it keeps returning, stop using the affected function until it's repaired.
Where do I find my LG range model number?
Usually on a label inside the oven door frame or the storage drawer. Have it ready when you contact LG.
The Bottom Line
Most LG oven error codes point to a sensor, heating, fan, door lock or control problem. Start with LG's two steps: press Clear/Off, then reset the breaker for 30 seconds. If the code comes back, note it with your model number and arrange service, especially for heating, door lock, voltage and board errors.
About this guide
Written by the TopOvenPicks editorial team using LG's US and Canadian support help library. Codes and meanings can vary by model and year, so always check your owner's manual. For gas leaks or electrical problems, contact your utility or a licensed professional.
Source: LG Range Error Codes List · About TopOvenPicks
TopOvenPicks is reader-supported. When you buy through links on our site, we may earn an affiliate commission at no extra cost to you. Prices and availability change often, so always confirm details on Amazon.





