Samsung oven error codes (Samsung calls many of them "information codes") usually start with C-. The most common: C-20, C-21 or C-22 (temperature sensor), C-24 (oven heating too fast, often a blocked vent), C-d1 (door lock), C-d0 (button held or stuck) and C-F0, C-F1 or C-F2 (electronics communication). Samsung says most codes clear with a reset. Type your code below to jump to the fix.
All Samsung Oven Codes at a Glance
These meanings come from Samsung's own support pages for ranges and wall ovens (US) and built-in ovens (UK). Codes can differ by model, so confirm with your manual.
| Code | Meaning | Action |
|---|---|---|
| C-20, C-21 or C-22 | Temperature Sensor | DIY checks + pro |
| C-24 | Oven Heating Too Fast | Try a reset first |
| C-d1 | Door Lock Malfunction | DIY checks + pro |
| C-d0 | Button Problem | Try a reset first |
| C-F0, C-F1 or C-F2 | Electronics Communication | DIY checks + pro |
| dC or dE | Divider (Partition) Check | Try a reset first |
| "door" | Door Not Closed | Try a reset first |
| S-01 | Safety Shutoff | Not a fault |
| C-10 | Self-Diagnosis Result | Not a fault |
| bAd LinE | Power Connection | Call service |
| tESt or tE5t | Demo Mode | Not a fault |
| Underlined "u" | Pan Detection (Induction) | Try a reset first |
| "Cooktop in use" | Self Clean Blocked | Not a fault |
| PrE | Preheating | Not a fault |
How to Reset a Samsung Oven
Samsung's recommended steps for most codes:
- Turn it off and onUse the oven's Power or Off button to turn the range off, then back on.
- Cut the powerIf the code returns, switch off the circuit breaker (or unplug the range), wait at least 30 seconds, and turn it back on.
- Test the ovenRun a simple Bake cycle and watch for the code.
- Request service if it returnsNote the code and your model number before contacting Samsung.
After a power outage, a flashing clock or codes can appear; see how to reset an oven after a power outage.
Samsung Oven Error Codes Explained
C-20, C-21 or C-22: Temperature Sensor
DIY checks + proWhat it means: Samsung lists these codes as sensor malfunctions. Some owners see C-21 when the oven overheats, so take it seriously. (Source: Samsung UK support)
Common causes
- A faulty oven temperature sensor or wiring
- A control problem reading the sensor
- Overheating caused by blocked vents
What to try
- Turn the oven off and restart it.
- If it continues, turn off the power for at least 30 seconds, then reconnect.
- If the oven seems to be overheating, keep it off and request service.
- Make sure the cooktop vent isn't blocked.
C-24: Oven Heating Too Fast
Try a reset firstWhat it means: The temperature sensor detected the oven temperature rising faster than normal, usually because the vent at the back of the cooktop is blocked or partly blocked. (Source: Samsung US support)
Common causes
- A pan or other item covering the oven vent on the cooktop
- Restricted airflow
What to try
- Remove anything covering the vent.
- While cooking, open and close the door a few times for about 3 seconds each to release warm air.
- Or turn the oven off and leave the door open for about a minute to cool.
C-d1: Door Lock Malfunction
DIY checks + proWhat it means: Samsung lists C-d1 as a door lock malfunction. It often shows up around self-clean. (Source: Samsung UK support)
Common causes
- The door lock didn't engage or release
- The door isn't fully closed
- A faulty lock motor or switch
What to try
- Make sure the door is fully closed and nothing blocks the latch.
- Turn the oven off and restart it.
- If it continues, cut power for at least 30 seconds and reconnect.
- Request service if the code returns.
C-d0: Button Problem
Try a reset firstWhat it means: Samsung says C-d0 appears when a button is pressed and held for a period of time. (Source: Samsung UK support)
Common causes
- A stuck or pressed button
- Water or residue on or around the control panel
What to try
- Clean the buttons and make sure there's no water on or around them.
- Turn the oven off and try again.
- If it persists, the control panel may need service.
C-F0, C-F1 or C-F2: Electronics Communication
DIY checks + proWhat it means: These codes relate to the oven's electronics. C-F0 is a communication error between electronic components (main and sub boards). C-F1 occurs only during EEPROM (memory) read/write. C-F2 means a communication problem between the touch controller and the main or sub control. (Source: Samsung US and UK support)
Common causes
- A temporary electronic glitch
- A failing control board or connection
- On some induction models, software that needs updating
What to try
- Turn the oven off and restart it.
- If it continues, cut power for at least 30 seconds and reconnect.
- For C-F0 on induction models NSI6D*9100, NSI6D*9300 or NSI6D*9500, Samsung offers a software update via SmartThings: reset power, connect the range to SmartThings, then restart it to trigger the update.
- If the code returns, request service.
dC or dE: Divider (Partition) Check
Try a reset firstWhat it means: On Flex Duo or Dual Cook ovens, these codes mean the divider isn't where the oven expects it: removed during Dual mode, inserted during Single mode, or not installed properly. (Source: Samsung US and UK support)
Common causes
- Divider inserted or removed during cooking
- Divider not pushed in fully or in the wrong rack position
- Something pressing the divider switch at the back
What to try
- Don't remove the divider during Dual cook mode.
- Reinstall it fully: Samsung says the third position from the top on electric and dual fuel models, or the fourth on gas models.
- If the divider isn't in the oven, make sure nothing presses the switch at the back.
- Turn the oven off and restart; cut power for 30 seconds if needed.
"door": Door Not Closed
Try a reset firstWhat it means: The oven thinks the door isn't closed. (Source: Samsung US support)
Common causes
- The door isn't fully closed
- A stuck door plunger switch
What to try
- Close the door fully.
- Check the door plunger switch: a round black cap with a pin that should move freely when pressed.
- If it's stiff or doesn't extend, or the code continues with the door closed, request service.
S-01: Safety Shutoff
Not a faultWhat it means: The oven ran at a set temperature for a long time and shut off for safety. Samsung lists the limits as 16 hours under 105°C, 8 hours from 105°C to 240°C, and 4 hours from 245°C to max. (Source: Samsung UK support)
Common causes
- Very long cooking at one temperature
What to try
- This isn't a system failure. Turn the oven off, remove the food and start again normally.
C-10: Self-Diagnosis Result
Not a faultWhat it means: C-10 can appear when running self-diagnosis through the SmartThings app, especially if the oven starts very hot or very cold. Samsung says it can be ignored if the oven heats normally. (Source: Samsung US support)
Common causes
- Sensor limits during a diagnosis test
What to try
- If it appears only during the app test and the oven heats normally, ignore it.
- If it appears during normal cooking, reset the oven and request service if it returns.
bAd LinE: Power Connection
Call serviceWhat it means: The power connection isn't connected properly. (Source: Samsung US support)
Common causes
- Incorrect power cord or terminal-block connection
What to try
- Have the power connection corrected following the installation manual or by a professional installer.
tESt or tE5t: Demo Mode
Not a faultWhat it means: The range is in Demo mode, so the oven and cooktop won't heat (gas burners still ignite). (Source: Samsung US support)
Common causes
- Demo mode was turned on
What to try
- Follow your user manual to turn off Demo mode for your model.
Underlined "u": Pan Detection (Induction)
Try a reset firstWhat it means: On induction cooktops, the cookware isn't suitable because of its size, material or position. The element won't heat and turns off after a minute. (Source: Samsung US support)
Common causes
- Non-magnetic cookware
- A pan too small for the zone
- Pan off-center
What to try
- Use magnetic, induction-compatible cookware sized for the zone and centered on it.
"Cooktop in use": Self Clean Blocked
Not a faultWhat it means: Self Clean can't start while a cooktop burner or element is on. (Source: Samsung US support)
Common causes
- A burner or element is still on
What to try
- Turn off all burners and elements, then start Self Clean.
PrE: Preheating
Not a faultWhat it means: The oven is preheating. PrE stays on until the oven reaches the set temperature. (Source: Samsung UK support)
Common causes
- Normal preheat
What to try
- Keep the door closed until preheating finishes.
Codes Not Listed Here
Samsung's US guide lists only codes with troubleshooting steps, and its UK page notes that codes can vary by model. For any other code, Samsung recommends:
- Turn the oven off and on with the Power button.
- If the code returns, turn off the breaker for 30 seconds and restore power.
- If it comes back again, request service with your model number.
For problems without a code, use our oven troubleshooting guide. Own another brand? See GE and Whirlpool error codes.
SmartThings Diagnosis and Updates
Many newer Samsung ranges connect to the SmartThings app, which can help:
- Self-diagnosis: the app can run a test and report codes. Samsung notes C-10 can appear during this test if the oven starts very hot or cold, and can be ignored if the oven heats normally.
- Firmware updates: Samsung offers a software fix for C-F0 on some induction models (NSI6D*9100, NSI6D*9300, NSI6D*9500) through SmartThings.
- Remote alerts: the app can notify you of codes while you're away from the kitchen.
Interested in connected cooking? See the best smart ovens.
DIY or Call a Technician?
Usually safe to DIY
- Power resets
- Clearing blocked vents (C-24)
- Reinstalling the divider (dC/dE)
- Drying and cleaning the control panel (C-d0)
- Turning off Demo mode (tESt)
Call a technician
- Sensor codes that return (C-20, C-21, C-22)
- Door lock failures (C-d1)
- Electronics codes that persist (C-F0, C-F1, C-F2)
- Power connection problems (bAd LinE)
- Anything involving gas
Before deciding on an expensive repair, see how long ovens last for repair-or-replace advice.
How to Prevent Error Codes
- Keep the cooktop vent clear. Don't rest pans or sheets over the vent at the back of the cooktop.
- Keep the control panel dry. Wipe it with a barely damp cloth; never spray cleaner on it.
- Use the divider correctly on Flex Duo and Dual Cook ovens.
- Use self-clean sparingly to reduce stress on the door lock and sensors.
- Keep firmware updated if your oven connects to SmartThings.
Samsung Oven Error Code FAQs
What does C-21 mean on a Samsung oven?
Samsung lists C-20, C-21 and C-22 as sensor malfunctions. Turn the oven off and on, then cut power for 30 seconds if it continues. If the oven seems to overheat, keep it off and request service.
What does C-24 mean on a Samsung range?
The oven temperature is rising faster than normal, usually because the cooktop vent is blocked. Clear the vent and let the oven cool or open and close the door to release heat.
What does C-d1 mean on a Samsung oven?
It's a door lock malfunction. Make sure the door is fully closed, restart the oven, and cut power for 30 seconds if needed.
What does C-d0 mean?
Samsung says C-d0 appears when a button is pressed and held for a while. Clean and dry the control panel and restart the oven.
What does C-F2 mean on a Samsung oven?
C-F2 means a communication problem between the touch controller and the main or sub control. Restart the oven and cut power for 30 seconds if it continues.
What does dE or dC mean on a Samsung oven?
It's a divider check on Flex Duo or Dual Cook ovens. The divider was inserted or removed at the wrong time or isn't installed properly.
Why does my Samsung oven say "door"?
The oven thinks the door is open. Close it fully and check that the door plunger switch moves freely.
What does tESt mean on a Samsung range?
The range is in Demo mode and won't heat. Follow your manual to turn Demo mode off.
What does S-01 mean?
It's a safety shutoff after the oven has run for a long time at one temperature. It isn't a failure; turn the oven off and start again.
How do I reset my Samsung oven?
Turn it off and on with the Power button. If the code returns, turn off the breaker for at least 30 seconds and restore power.
The Bottom Line
Most Samsung oven codes clear with a restart or a 30-second power reset. C-20 to C-22 point to the temperature sensor, C-24 to a blocked vent, C-d1 to the door lock, C-d0 to the control buttons and C-F codes to the electronics. If a code keeps returning, note it with your model number and request service.
About this guide
Researched and written by the TopOvenPicks editorial team. Code meanings are based on Samsung's published support pages for US ranges and wall ovens and UK built-in ovens. Codes vary by model; always follow your owner's manual and use a qualified technician for electrical, gas and control repairs.
Sources: Samsung US, "Samsung range or wall oven error codes"; Samsung UK, "Check out the information codes on my oven."
TopOvenPicks is reader-supported. When you buy through links on our site, we may earn an affiliate commission at no extra cost to you.





